manualshive.com logo in svg

Arista vEOS, Configuration Manual, Page: 33 / 128

Share
Download
Arista vEOS Configuration Manual Download Page 33

The following example removes the peer IP address from the vEOS running-config.

veos(config)#cloud high-availability
veos(config-cloud-ha)#peer veos2
veos(config-cloud-ha-peer-veos2)#no peer 10.10.10.149

primary gateway (vEOS - Azure)

The primary-gateway command in the cloud-ha submode assigns the primary gateway parameters for the Azure
high availability peered cloud. The no primary-gateway command removes the configuration from the vEOS
running-config.

Note:  Supported on Azure platform only.

Command Mode

Cloud HA Azure Configuration Submode

Command Syntax

primary-gateway[Azure Rt_Info]resource-group[Name]

no primary-gateway[Azure Rt_Info]

Parameters

• Azure Rt_Info

• azure-rt-name The azure route name.

• dest-ip-address/mask The destination IP address.

• local-ip-address The local IP address.

• resource-group

• Name  Azure resource group name.

Example:

The following example configures the parameters for the Azure high availability peered cloud.

veos(config)#cloud high-availability
veos(config-cloud-ha)#peer veos2
veos(config-cloud-ha-peer-veos2)#azure
veos(config-cloud-ha-peer-veos2-azure)#primary-gateway Rt1 10.10.1.1/10 
1.1.1.1 resource-group test 

Example:

The following example removes the primary-gateway parameters for the Azure high availability peered cloud.

veos(config-cloud-ha-peer-veos2-azure)#no primary-gateway Rt1 10.10.1.1/10

veos(config-cloud-ha-peer-veos2-azure)#

proxy (vEOS)

The proxy command configures the cloud provider aws proxy. The no proxy command removes the configuration
from the running-config. The exit command returns the vEOS to global configuration mode.

Note:  Supported on AWS platform only.

Command Mode

33

Cloud High Availability

Summary of Contents for vEOS

































































































































Reviews:

No comments