Argox X-2300, User Manual, Page: 52 / 126

52
Resetting to Factory Default Settings
To reset the printer to factory default settings:
1. Turn off the printer.
2. Press and hold the CANCEL button and turn on the printer.
3.
For X-1000VL:
When RIBBON indicator blinks, release the CANCEL button.
For printer models other than X-1000VL:
When “RESET …” is displayed on the LCD and the READY
indicator blinks, release the CANCEL button.
(The Ethernet models will first prompt “ETHERNET CARD
INITIALIZING” on LCD after Power-on and then show the
“RESET …” message as described above.)
4.
For X-2000V Zip: The printer feeds 12-inches of blank labels.
For printer models other than X-2000V Zip:
When “READY” is displayed on the LCD, the READY indicator
stops blinking but remains illuminated.
5. The following information is now back to defaults:

Label parameters

Heat (Darkness)

Speed

Symbol set (language)

Others for specific emulation