45
MASK
When DHCP is disabled, default IP
address is 192.168.1.100.
If “_” sign appears, that means that
DHCP
setting is disabled. On the
contrary,
DHCP
setting is enabled.
1.
FEED/CONFIG. :
change contents.
(ex. from 000.000.000.000 to
255.255.255.255)
2.
PAUSE/CALIBR.
:
shift “_”sign position.
(ex. from 255.255.255.255 to
255.255.255.255)
3.
CANCEL/RESET
.:
Select next function setting.
(“_”
sign must at the third digit of each
parameter, for example, xxx).
4.
To change IP ADDRESS or
SUBNET MASK, enter DEFAULT
GATEWAY setting, press CANCEL
button once; LCD will prompt
“ETHERNET CARD UPDATE
FINISH…”
Then reboot the printer.
DEFAULT
GATEWAY
xxx.xxx.xxx.xxx
MAC
ADDRESS
yyyy-yyyy-yyyy
(yyyy = 0000~FFFF)
To have more information on Ethernet settings, please refer to
Ethernet User’s Guide.
Summary of Contents for X-2300
