Argo-Hytos EL7-E, Instruction Manual

Page: 5 / 60

8 ( )
90 (3.54)
34 (1.34)
35,4 (31.39)
50,4 (1.98) 56,4 (2.22)
20,7 (0.82)
37,1 (1.46)
17,5 (0.69)
65,8 (2.59)
44,8 (1.76)
REF AIN AGND
CANH CANL GND
VIN GND GND
A- SHLD B-
A+ SHLD B+
L L
INPUTS OUTPUTS
POWER
BLUETOOTH
ERROR
CONFIGURATION
BUTTON
EL7-E_Pokyny_Instructions_Hinweise_19152_1en_de_cz_04/2021
Page 5
www.argo-hytos.com
3. Product description
3.1 Front panel:
LED Meaning
Green (PWR) A lit LED indicates power (Ucc), flashes when the supply voltage is less than 9 or more than 32 V DC
Blue (BT) LED flashes – Bluetooth is unpaired / LED is lit - Bluetooth is paired
Red (ERR) LED is lit – error status (current signal out of specified range, solenoid coil disconnected)
Configuration button – button for setting the default password or resetting the Bluetooth module, see. chapter
“System Settings” page 17.
3.2 Terminal description:
Terminal description Input analogue signal
REF
Output Uref = 5 V DC
AIN Input command signal
AGND Command signal GND
VIN Supply vUcc
GND Supply GND
Terminal description Connection to CAN line
CANH
CAN HIGH
CANL CAN LOW
GND CAN GND
VIN Supply vUcc
GND Supply GND
Terminal description Output PWM signal to solenoid A and B
A- / A+
Outputs for A solenoid connection
B- / B+ Outputs for B solenoid connection
SHILD Cable shielding
Terminal description Output PWM signal for coil connection of bipolar solenoid
L / L
Outputs for coil connection of bipolar solenoid
SHILD Cable shielding
INPUTS
OUTPUTS