Argo-Hytos EL7-E, Instruction Manual

Page: 20 / 60

EL7-E_Pokyny_Instructions_Hinweise_19152_1en_de_cz_04/2021
Page 20
www.argo-hytos.com
Caution!
The necessary safety guidelines must be strictly observed before disconnecting the electronics from operation.
To prevent uncontrolled behaviour of other equipment, all electrical and hydraulic circuits must be secured before disconnecting.
12. Post – product activities
The EL7_mobile application is removed from the device by standard uninstallation of the application according to the type of Android of iOS device
used, see instructions for your device.
Physical disconnection of electronics can only be performer by a trained person with knowledge in electrical engineering min. level 6 according to
Decree 50/1978.
At the end of the product’s service life, it is necessary to proceed with disposal in accordance with the applicable legislation. The product consists of
parts that are independently recyclable after sorting.
In terms of the applicable waste legislation, electrical waste is hazardous waste, the disposal of which is subject to a special regime. It is forbidden
to throw electrical waste into containers intended for municiple waste collection. The product can be handed in at the collection points for electrical
waste.
13. Contact to manufacturers, distributors, service, repairs department, complaints
ARGO-HYTOS s.r.o.
Dělnická 1306
CZ - 543 15 VRCHLABÍ
Czech Republic
Tel. +420 499 403 111
E-mail:
info.cz@argo-hytos.com