Argo-Hytos EL7-E, Instruction Manual

Page: 7 / 60

1
1
2
EL7-E_Pokyny_Instructions_Hinweise_19152_1en_de_cz_04/2021
Page 7
www.argo-hytos.com
4. Software of devices and electronic control units
1 – electronics serial number – the number listed on the electronics side label. The number appears
in the application when scanning available drives in the vicinity.
2 – current firmware version in electronics.
No cables are required to connect to the unit, the connection is made via Bluetooth wireless technology. You must have a device that supports
Bluetooth wireless technology with Android from Version 7 and higher or Apple from iOS 10.3.3. The installation is performer according to the
installation instructions on page 8.
The electronics firmware can be updated using a mobile application see. instructions on page 18.
5. Product modification
6. Target group (s) of users
An overview of possible product modifications is described in the order key.
Further modifications can only be created using the program setting of the device within the fixed limits and restrictions.
Hardware modifications to the product are not permitted.
All of the aforementioned activities related to this product, especially installation and setting of parameters, require professional technical knowledge
and experience in the field of hydraulics and electrical engineering. The minimum required level of professional competence in electrical engineering
is level 6 according to decree 50/1978.
This level is generally defined as the performance of various activities that require an understanding of technical factors and contexts. This may lead
to the need of correct interpretation (eg. tolerances, operating methods) or to the application of various non-repetitive procedures. This may require
the performance of inspections, simple analyzyes and diagnostics, the abilty to respond operationally to changes. Teamwork is often necessary.
It is forbidden to carry out all actvities related to this product by persons that:
› minors (the exception is the practical training of pupils under the professional supervison of a teacher)
› without the specified professional competence
› under the influence of alcohol and / or drugs
› patients whose helth condition could affect safety (reduced attention and ability toe react in a timely manner, excessive fatigue)
› under the influence of drugs that have a demonstratable effect on attention
7. Instructions for use broken down into product life stages
7.1 Transport and storage of the product
Take extra care during transport, handling and storage to avoid damage to the product.
Storage is permitted in dry, dust-free areas without the risk of accidental mechanical damage.
At temperatures of -40 °C … +40 °C, max. Relative humidity 80 % at 20 °C and without direct sunlight.