DMX ETH Manual
page 62
rev 1.16
INC
Description:
Command:
Changes all move commands to incremental mode.
Syntax:
INC
Examples:
INC
;***Change to incremental mode
PX=0
;***Change position to 0
X1000
;***Move axis to position 1000 (0+1000)
WAITX
X2000
;***Move axis to position 3000 (1000+2000)
WAITX
JOGX[+ or -]
Description:
Command:
Perform jogging using current high speed, low speed, and
acceleration.
Syntax:
JOGX[+ or -]
Examples:
JOGX+
;***Jogs axis in positive direction
STOPX
WAITX
JOGX-
;***Jogs axis in negative direction
STOPX
WAITX
or -]
Description:
Command:
Perform homing using current high speed, low speed, and
acceleration.
Syntax:
or -]
Examples:
;***Limit homes axis in positive direction
LSPD
Description:
Read:
Get low speed. Value is in pulses/second.
Write:
Set low speed. Value is in pulses/second.
Range is from 1 to 400,000.
Syntax:
Read:
[variable]=LSPD
Write:
LSPD=[long value]
LSPD=[variable]
Summary of Contents for DMX-ETH
Page 13: ...DMX ETH Manual page 13 rev 1 16 Figure 4 1 Torque Curve NEMA 23 Figure 4 2...
Page 14: ...DMX ETH Manual page 14 rev 1 16 Figure 4 3...
Page 17: ...DMX ETH Manual page 17 rev 1 16 DMX ETH Interface Circuit Figure 5 2...
Page 21: ...DMX ETH Manual page 21 rev 1 16 Main Control Screen Figure 6 3 A B C D E F L K J H M G I...
