DMX-CAN Manual
page 25
rev 1.6
Figure 6.12
1.
Response Window – Displays the response from the command line
2.
Address – Select the address of the DMX-CAN module which you
wish to communicate. Selecting address
‘00’
will send a broadcast
command which will be received by all DMX-CAN modules on a RS-
485 bus.
3.
Send command – Type the commands here manually. When sending
commands, you do not need to type the device name. For example,
when you want to know what the motor status is, type MST and you
will see a number on the reply that represents the status of the motor.
Press the Enter key to send the command.
4.
Save – Save the terminal text into a text file. When this button is
pressed, typical Windows file save dialog box will open:
2
4
1
3
