39
CD211A
5. Remove the cap screw on the end of the tensioner;
then remove the two cap screws securing the ten-
sioner adjuster assembly and remove the assembly.
Account for a gasket.
CC009D
6. Using an awl, rotate the C-ring in its groove until it is
out of the cylinder head; then remove the C-ring.
NOTE: Care should be taken not to drop the C-ring
down into the crankcase.
CC012D
7. Bend the washer tabs down and remove the two cap
screws securing the sprocket to the camshaft; then
drop the sprocket off the camshaft.
CC013D
8. While holding the chain, slide the sprocket and cam-
shaft out of the cylinder head.
NOTE: Loop the chain over the cylinder head and
secure it to keep it from falling into the crankcase.
HI-036
9. Remove the cap screw (A) securing the chain ten-
sioner (B) inside of the cylinder head (account for a
washer). Remove the chain tensioner.
H1-037B
10. Remove the five nuts securing the cylinder head to
the cylinder.
Summary of Contents for VLX 70002017
Page 1: ...2017 S SERVICE ERVICE MANUAL ANUAL www arcticcat com...
Page 137: ...136 NOTES...
