111
XR348
3. Using a boot-clamp pliers (or suitable substitute),
remove the boot clamps; then remove the boots and
splined drive from the input shaft.
4. Remove the snap ring; then remove the input shaft
from the pinion housing.
XR349
5. Using a seal removal tool, remove the input shaft
seal. Account for a spacer.
GC010
6. Remove the snap ring securing the input shaft bear-
ing; then place the pinion housing in a press and
remove the bearing.
GC011
XR350
XR351
Assembling Input Shaft
1. Place the pinion housing in a press and install the
input shaft bearing. Secure the bearing with the
existing snap ring making sure the sharp edge of the
snap ring faces to the outside.
GC012
Summary of Contents for VLX 70002017
Page 1: ...2017 S SERVICE ERVICE MANUAL ANUAL www arcticcat com...
Page 137: ...136 NOTES...
