Arctic Cat VLX 70002017, Service Manual

Page: 23 / 138

22
6. Install the storage compartment box; then attach the
storage compartment cover assembly by engaging
the tabs into the slots and sliding rearward. Lock the
storage compartment lid to hold the assembly in
place.
7. Place the instrument pod into position; then secure
with two reinstallable rivets and the ignition switch
retaining ring.
FI464A
CF724A
8. Install the steering post access cover and secure with
four reinstallable rivets; then install and secure the
radiator access cover.
FI466A
FI465A
Handlebar Grip
INSPECTING/REMOVAL
1. Inspect the grip for wear, cuts, or cracks.
2. Inspect the grip for deterioration.
CF747
3. If a grip is damaged, cut the grip lengthwise using a
sharp knife or box cutter; then peel off the grip.
INSTALLING
 NOTE: Before installing a grip, use contact removal
spray or alcohol to clean the handlebar of glue resi-
due, oil, or any other contaminant.
1. Apply a liberal amount of Handlebar Grip Adhesive
to the inside of a new grip.
2. Slide the grip onto the handlebar until it is fully
seated with the smooth part of the grip facing up.
3. Wipe off any excess glue.
Throttle Control
REMOVING
1. Remove the two machine screws securing the throt-
tle control to the handlebar.