Arctic Cat DVX 250 Operator'S Manual Download

Page: 72 / 108

Odometer/Trip Meter (7)

- Displays distance in miles or

kilometers the vehicle has traveled.

The odometer (ODO)

displays total distance and cannot be reset to zero. The trip meter

(TRIP) displays distance and can be reset to zero. The distance

(miles/kilometers) will correspond to the speedometer. To shift

between (ODO) and (TRIP), press and hold Mode/Set Button (2)

for two seconds. To reset the (TRIP) display to zero, shift the

display to (TRIP); then press and hold Mode/Set Button (2) and

simultaneously press Mode/Set Button (1) until the display reads

zero. Release the buttons.

Shift Lever (DVX)

To engage the forward gear from

neutral,

shift

ver outward and

To engage reverse gear from neu-

tral,

move the shift lever outward

rearward into the R position.

Shift Lever (2x4)

To engage the high range from

neutral,

! WARNING

Never shift the ATV into reverse gear when the ATV is moving as it

could cause the ATV to stop suddenly throwing the operator from

the ATV.

! WARNING

Never shift the ATV into reverse gear when the ATV is moving as it

could cause the ATV to stop suddenly throwing the operator from

the ATV.

KM203A

KM1 4A

actuate any brake lever and

move the

forward.

shift

ver outward and

actuate any brake lever and

move the

forward.

To engage the low range from high

range, actuate any brake lever and

move the shift lever outward and

forward.

actuate any brake lever and

and

To engage reverse gear from neu-

tral,

move the shift lever outward

rearward into the R position.

actuate any brake lever and

and

250_DVX MANUAL

02.08.2006, 15:27 Uhr

Summary of Contents for DVX 250













































































































Search results

Summary of Contents for DVX 250

Reviews:

Related manuals for DVX 250

Brands by name

Popular brands

Arctic Cat DVX 250, Operator'S Manual

Search results

Summary of Contents for DVX 250

Reviews:

Related manuals for DVX 250

Brands by name

Popular brands