Arctic Cat DVX 250 Operator'S Manual Download

Page: 24 / 108

WARNING

Indicates a potential hazard that could

result in a serious injury or death.

Warnings

! WARNING

POTENTIAL HAZARD

Stalling, rolling backwards, or

improperly dismounting while

climbing a hill.

WHAT CAN HAPPEN

Could result in the ATV

overturning.

HOW TO AVOID THE

HAZARD

Use proper gear and maintain

steady speed when climbing a

hill.
If you lose all forward speed:

Keep weight uphill.

Apply the brakes.

Engage the parking brake lock after you are stopped.

If you begin rolling backwards:

Keep weight uphill.

Apply the brakes while rolling backwards.

When fully stopped, engage the parking brake lock.

Dismount on uphill side or to a side if pointed straight uphill.
Turn the ATV around and mount following the procedure described in

this Operatorís Manual.

ATV-0011

250_DVX MANUAL

02.08.2006, 15:23 Uhr

Summary of Contents for DVX 250













































































































Search results

Summary of Contents for DVX 250

Reviews:

Related manuals for DVX 250

Brands by name

Popular brands

Arctic Cat DVX 250, Operator'S Manual

Search results

Summary of Contents for DVX 250

Reviews:

Related manuals for DVX 250

Brands by name

Popular brands