Arctic Cat DVX 250 Operator'S Manual Download

Page: 40 / 108

Active Riding

Shifting (DVX)
This ATV has a single-range automatic transmission with reverse. To

shift the ATV, follow these steps:

1. To engage the forward gear

from neutral,

outward and forward.

2. To engage reverse gear from

neutral, move the shift lever

outward and rearward into the R

position.

Shifting (2x4)
This ATV has a dual-range automatic transmission with reverse. To

shift the ATV, follow these steps:

2. To engage the low range from

high range, move the shift lever

outward and forward.

!CAUTION

Always come to a complete stop before attempting to shift from
one gear to the other. Always shift on level ground, or engage the
brake lever lock before shifting into forward gear or into reverse.

! WARNING

Do not start the engine or operate this ATV with the V-belt cover
removed. Severe injury could result.

KM203A

KM124A

move the shift lever

actuate any brake

lever and

1. To engage

the

neutral,

ward and forward.

move the shift lever out-

actuate any brake

and

high range from

lever

WARNING

Indicates a potential hazard that could

result in a serious injury or death.

WARNING

Indicates a potential hazard that could

result in a serious injury or death.

WARNING

Indicates a potential hazard that could

result in a serious injury or death.

250_DVX MANUAL

02.08.2006, 15:25 Uhr

Summary of Contents for DVX 250













































































































Search results

Summary of Contents for DVX 250

Reviews:

Related manuals for DVX 250

Brands by name

Popular brands

Arctic Cat DVX 250, Operator'S Manual

Search results

Summary of Contents for DVX 250

Reviews:

Related manuals for DVX 250

Brands by name

Popular brands