Arctic Cat DVX 250 Operator'S Manual Download

Page: 43 / 108

WARNING

Indicates a potential hazard that could

result in a serious injury or death.

Active Riding

Leaning, Weight Shift, and Balance
When you turn, the trick is to move forward and slide over to the side

of the seat thatís on the inside of the turn. Support your body weight

on the outside footrest. At the same time, lean your body to the inside

of the turn. Pay attention to the handling - if you feel the tires coming

off the ground, reduce speed, shift more of your body weight to the

side thatís lifting, and make the turn wider if possible.

Wide Turns
About 20% of ATV accidents happen during turns. If you donít

understand turning techniques, itís easy for the ATV to get away from

you by losing traction, plowing, or tipping. Use this method for wide

turns:

1. Ease off the throttle as you approach the turn to slow down.
2. Use the principles of leaning, weight shifting, and balancing -

shift your body weight to the inside of the turn.

3. Gradually increase your speed as you come out of the turn.

ATV-0013

ATV-0024

ATV-0025

ATV-004

ATV-0045

ATV-0044

WARNING

Indicates a potential hazard that could

result in a serious injury or death.

WARNING

Indicates a potential hazard that could

result in a serious injury or death.

59�

WARNING

Indicates a potential hazard that could

result in a serious injury or death.

250_DVX MANUAL

02.08.2006, 15:25 Uhr

Summary of Contents for DVX 250













































































































Search results

Summary of Contents for DVX 250

Reviews:

Related manuals for DVX 250

Brands by name

Popular brands

Arctic Cat DVX 250, Operator'S Manual

Search results

Summary of Contents for DVX 250

Reviews:

Related manuals for DVX 250

Brands by name

Popular brands