Archgard 22-DVIE22LN-1 Installation, Operation And Maintenance Manual Download

Page: 52 / 64

Maintenance

20.9 Replacing the Piezo Igniter

Figure 20.09.01:

Step 1:

Remove the two (2) 1/4" Tek screws securing the piezo

igniter bracket to the bottom of the fireplace shell.

Figure 20.09.02:

Step 2:

Unplug the wire from the piezo igniter.

Before you begin:

•

Ensure the fireplace is off and cool before servicing

• Ensure the gas supply is turned OFF and disconnect the power supply

•

Flip down the control access cover (see

Section 6.4

)

Figure 20.09.03:

Step 3:

Remove the retaining nut from the back side of the

bracket.

Installation is the reverse of removal.

WARNING:

Servicing of this appliance

must be conducted by a qualified service technician

. Improper servicing, adjustment or

alteration of this appliance may cause property damage, personal injury or loss of life. All servicing should be conducted

with the appliance cold. All replacement parts must be authorized by Ambiance for suitability.

Summary of Contents for 22-DVIE22LN-1

































































Search results

Summary of Contents for 22-DVIE22LN-1

Reviews:

Related manuals for 22-DVIE22LN-1

Brands by name

Popular brands

Archgard 22-DVIE22LN-1, Installation, Operation And Maintenance Manual

Search results

Summary of Contents for 22-DVIE22LN-1

Reviews:

Related manuals for 22-DVIE22LN-1

Brands by name

Popular brands