37
Installation
18.1 Log Set
WARNING
Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this appliance
may result in property damage or personal injury.
The Archgard burner and fiber logs set are designed to give a realistic fire package. Care must be given when first installing the logs or
when removed for servicing, as they can be damaged or broken if not handled properly.
After opening the log set package, inspect the logs to ensure that no damage has occurred inside the package. Please report any
damage immediately to your Authorized Archgard Dealer.
Gas and vent connection must be made before installing the embers and logs on the pan burner.
CAUTION:
DO NOT block pilot opening with embers or glass media material.
NOTE:
Improper placement of logs and embers may cause soot accumulation on the internal parts and glass. This is not covered under
warranty. Do not use broken or damaged logs.
18.0 Media Installation
Step 1:
Place Log #2 over the pins on the right side of the burner.
Figure 18.1.01: Identifying Logs.
Figure 18.1.02:
Figure 18.1.03:
Log 2 Installed
2
1
3
4
5
6
Summary of Contents for 22-DVIE22LN-1
Page 64: ......