background image

 
 
 

 

 
 
 

 

 
 
 
 
 
 

 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
DESA 

INTERNATIONAL 

          

2701 INDUSTRIAL DRIVE 

 

 

 

 

 

 

 

 

 

            PN 56095 

P.O. 

BOX 

90024 

             

REV 

BOWLING GREEN, KY 42102-9004           

 

 

 

 

 

 

 

 

   6/00 

www.desatech.com 

SAVE THIS BOOK

 

This book is valuable. In addition to instructing you on how to install and maintain your appliance, it also contains information that will 
enable you to obtain replacement parts or optional accessory items when needed. Keep it with your other important papers. 

 

                                                                                                                                    

36” Open Corner Circulating (louvered) 

                                                                        

Wood Burning Fireplace 

                                                                          Models: 36 LM Left Side Opening / 36RM Right Side Opening 
                                                                           Includes: Manual Variable Control Fan System, Combustion   

 

 

 

 

 

                                  

Air Kit and Bi-Fold Doors with Brushed Brass finish 

                                             INSTALLATION INSTRUCTIONS

WARNING:

  ALWAYS LEAVE GLASS 

DOORS FULLY OPENED OR FULLY CLOSED 
WHEN OPERATING THIS

 

FIREPLACE.

 

This fireplace is approved for use as a wood burning fireplace or for use with a vented gas log approved to ANS Z21.60, Z21.84 or 
RGA 2-72 standards or for use with a vent-free gas log heater approved to ANS Z21.11.2 standard.  A vent-free log can only be 
installed in an aftermarket (completion of sale, not for purpose of resale from the manufacturer), permanently located, manufactured 
(mobile) home, where not prohibited by local codes.  A DESA hood must be installed when using a vent-free gas log heater (see 
Accessories, p. 10) 

This firebox meets the construction and safety standards of H.U.D. for 
application in mobile homes when installed according to these instructions. 

ALL DIMENSIONS IN THIS MANUAL ARE IN 
INCHES UNLESS OTHERWISE SPECIFIED 

Summary of Contents for 36 LM














Reviews: