Arcam Solo sub, Handbook

Page: 5 / 60

E-5 E-4
English
important safety
instructions
installation
1. Read these instructions
All the safety and operating instructions
should be read before this product is
operated.
2. Keep these instructions
The safety and operating instructions
should be retained for future reference.
3. Heed all warnings
All warnings on the appliance and in
the operating instructions should be
adhered to.
4. Follow all instructions
All operating and use instructions should
be followed.
5. Do not use this apparatus near water
The appliance should not be used near
water or moisture – for example, in a wet
basement or near a swimming pool.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-
over.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Please keep the unit in a well-ventilated
environment.
Power
The Solo sub is supplied with a moulded
mains plug already fitted to the lead. Check
that the plug supplied fits your supply. If
your mains supply voltage or mains plug is
different, please contact your Arcam dealer
immediately.
Solo sub is fitted with a transformer
designed to accept nominal mains voltages
from 110-120V to 220-240V.
220-240V~
110-120V~
First of all, make sure the voltage switch is
set to the correct setting. Connect the mains
cable to the power socket on the back of the
Solo sub, making sure that it is pushed in
firmly. Now push the plug into your mains
socket and switch the socket on.
Note: If the unit is to be left unused for an
extended period, disconnect it from the
mains supply to save power.
Turn on from standby
The Solo sub is fitted with a mains power
switch on the rear panel, beside the power
socket. Make sure it is switched on to use
the Solo sub.
The push-in STANDBY button provides two
settings:
AUTO
and
MANUAL
.
STANDBY
AUTO MANUAL
AUTO (button out) switches the Solo sub’s
amplifier to standby after a period of about
15 minutes when no audio signal has been
received. When the unit is in standby the
PWR LED will glow red.
MANUAL (button pushed in) means that
the Solo sub’s amplifier is on whenever the
unit is receiving mains power. The
PWR
LED will glow green.
Note: If the INPUT selector is set to
WIRELESS, the WIRELESS LED will flash
blue intermittently whenever the unit is on
standby. It will glow a constant blue when
receiving an audio signal or mains power.
Care of your speaker
Running-in
In the same way as a new car requires a
‘running-in’ period, so do all loudspeakers.
Your Solo sub may sound good when you
first connect it, but with time it will improve
dramatically. It takes about 50 hours of use
before its full potential is realised.
Cleaning
To clean your speaker simply use a soft,
slightly dampened cloth to wipe off any
dust or dirt. Do not use solvent-based or
chemical cleaning products as these may
damage the finish of the speaker cabinet.
Power handling
Arcam speakers are designed to reproduce
recorded music under normal domestic
conditions. We do not recommend nor
warrant them for commercial applications,
such as discothèques, public address, etc.
What’s in the box?
<
Solo sub subwoofer
<
Power cord
<
User manual
<
Registration card
Positioning the unit
Place the Solo sub speaker unit on a level,
firm surface, avoiding direct sunlight and
sources of heat or damp.
Do not place the Solo sub in an enclosed
space such as a bookcase or closed
cabinet unless there is good provision for
ventilation. The unit is designed to run
warm during normal operation.
WARNING: To reduce the risk of fire or electric shock,
do not expose this apparatus to rain, moisture,
dripping or splashing. Objects filled with liquids,
such as vases should not be placed on the apparatus.
WARNING: The mains plug or appliance coupler is
used as a disconnect device, the disconnect device
shall remain readily operable.
This lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the
user to the presence of non-insulated ‘dangerous
voltage’ within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock.
Warning: To reduce the risk of electric shock,
do not remove cover (or back) as there are no
user-serviceable parts inside. Refer servicing to
qualified personnel.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance instructions
in the literature accompanying the appliance.
This equipment is a Class II or double
insulated electrical appliance. It has been
designed in such a way that it does not
require a safety connection to electrical earth.
Correct disposal of
this product
This product contains electrical
or electronic materials. The
presence of these materials may,
if not disposed of properly, have
potential adverse effects on the
environment and human health.
Presence of this label on the product means it
should not be disposed of as unsorted waste and
must be collected separately. As a consumer, you
are responsible for ensuring that this product is
disposed of properly.
15. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
16. Caution regarding installation: For
heat dispersal, do not install this unit
in a confied space such as a bookcase or
similar enclosure.