Last Rev Date: 07/11/12
Page 10 of 18
Fitting instructions# 3787907
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
VEHICLE PREPARATION ALL VEHCILES
WIRING OF LIGHTS
37.
Carefully read the wiring diagram
supplied at the end of these
instructions.
38.
Take the relay loom (6821198) from the
kit and position in the engine bay so
that all wires will reach the appropriate
connections.
39.
Starting with the passenger side, use
scotch locks to connect the red wire
from the indicator loom (6821152) to
the green wire from the vehicles front
park lamp.
40.
Connect the Yellow / Black wire from
the relay loom to the Green / Black wire
from the vehicles left indicator.
41.
Connect the Yellow and Black wires
from the relay loom to the Green and
Black wires from the indicator loom.
42.
Let the indicator loom hang freely for
connecting to the bull bar indicators
later on.
43.
Do the same for the driver’s side, using
the wiring diagram supplied as a
reference to the correct wire colours.
