ARAG Skipper LT, Installation, Use And Maintenance Manual

Page: 40 / 56

40
8.2.3
F3
Return
Activate the procedure to go back to job breaking point , as previously stored using the function "Pause" (Fig. 102)
Pres s
F3
to rec eive guidance information and go back to point of interest "Pause" (Fig. 117):
- A fuchsia line connecting the middle position to the flag shows the trajectory to be followed to get closer to marked point (
c
in Fig. 117).
- The display shows in fuchsia the number of tracks to be crossed before reaching point ( d in Fig. 117):
in the example,
+
next to the number indicates you shall move to the right,
-
indicates you shall move to the left.
Carry on driving.
- When you reach the track with the point of interest, the display shows the distance between your position and the point (
e
Fig. 118).
- Move along the track and check that distance in metres decreases: you are getting closer to the point.
When you are nearby, you can see the flag displayed.
- Once you reach the flag position, distance value gets to "zero" (Fig. 119): press
OK
or
ESC
to quit this procedure.
OK
Skipper LT recalls spraying job guidance information and flag is deleted.
ESC
Skipper LT recalls spraying job guidance information but flag remains memorised.
Fig. 117
Fig. 118
Fig. 119
WORK FUNCTIONS - PAGE 2