ARAG Skipper LT, Installation, Use And Maintenance Manual

Page: 32 / 56

32
7.2 Display
guidance Page
day disPLay mode night disPLay mode
Fig. 94
Fig. 95
a Graphical chart of deviation b .
Every led corresponds to 50 cm.
b
Deviation: distance between tractor position and the track to be followed.
c
L1 data: spraying job data, customisable by user
*
(par. 6.5.4 User preferences - Graphic settings).
d L2 data: spraying job data, customisable by user *
(par. 6.5.4 User preferences - Graphic settings).
e
Spray pass number (displayed ONLY IF machine features just one section
valve, par. 6.5.1): the reference line, calculated with the function “Mark AB”, is
number 0, tracks on the left are negative while the ones on the right are positive.
f Boom sections (displayed ONLY IF machine features more than one section
valve, par. 6.5.1): each triangle corresponds to a boom section (par. 7.3)
g
R2 data: spraying job data, customisable by user
*
(par. 6.5.4 User preferences - Graphic settings).
h Sprayed area
i
Reference tracks
L
Machine position
m
Point where spraying job is performed
n
Sprayed areas overlap
o R2 data: spraying job data, customisable by user *
(par. 6.5.4 User preferences - Graphic settings).
*
List of spraying job data that can be viewed:
Speed, Applied area, Calculated area, Spraying time, Productivity, Perimeter,
Date, Time, Direction, GPS signal quality, Track number, Available memory.
Job data
Fig. 96
Displayed data and relevant units of measurement are specified
in par. 10.3.
fieLd oVerVieW
day disPLay mode night disPLay mode
Fig. 97 Fig. 98
Indicators: Keys in Figures 97 - 98
Machine position
Point where spraying job is performed
Cursor
Sprayed area
Sprayed areas overlap
F2
M ark point (break job).
F3
Shift c ursor to the left
F5
Shi ft cursor down
F4
Shift cursor to the right
F6
Sh ift cursor up
Points of interest marked on field:
Job breaking point, entered using function "Pause" (chapt. 8)
USE
Following
page

Following
page


Back to
guidance
page