ARAG Skipper LT, Installation, Use And Maintenance Manual

Page: 22 / 56

22
Graphic settings
Fig. 49
R2 L2
Led bar R1 L1
Fig. 50
• L1 - L2 - R1 - R2 data
Allows setting spraying job data you wish to view on guidance
page (Fig. 50).
• LED bar
Allows viewing the led bar on guidance page (Fig. 50).
Acoustic settings
Fig. 51
• Acoustic alarms
Allows enabling/disabling acoustic warning activated during alarms.
• Sound at key press
Allows enabling/disabling tone activated when pressing keys.
• Section status sound
Allows enabling/disabling acoustic warning (two close beeps) indicating that it is necessary to open or close sections.
" User" key function
Fig. 52
Allows customization of the
USER
key.
When button is pressed, one of the following options is executed:
- Alignment (par. 8.2.4 -
F4
Align).
- Store job pause point (par. 8.2.1 -
F1
Pause).
- Pause point return (par. 8.2.3 -
F3
Return).
- Toggle 2D-3D view (par. 8.4.2 -
F2
2D-3D).
- Toggle sections management mode
(par. 6.5.4 -
User preferences
/
Guidance settings
/
Boundary sct. management
).
WARNING! This menu can be programmed ONLY if:
• spraying job is performed by a remote device
(
Remote option
, par. 6.5.4 -
User preferences
/
Guidance settings
/
Spraying activation
).
In other cases,
USER
key is programmed to activate the spraying job.
END OF PAR. 6.5 - MACHINES SETTINGS
PROGRAMMING - MACHINES SETUP
Par.
6.3
Scrolling menu items.
Increase / decrease data Quit the function or
data changes Confirm access or
data changes. Shift the
cursor Reset / disable
data