ARAG Skipper LT, Installation, Use And Maintenance Manual

Page: 38 / 56

38
8.2 Functions List: PAGE 2
8.2.1
F1
Pause
Store job breaking point "Pause" on field, represented by a flag at the point where it is stored .
Flag can be seen on guidance page (Fig. 111) and on field full zoom page (Fig. 112).
"Pause" breaking point can be stored using the two procedures described below:
guidance Page fieLd fuLL Zoom
1a
Pre ss
F1
when you are in the position to be stored:
flag will be positioned at that point (
a
in Fig. 111).
From this page, you can store a field point even if tractor is in another position.
1b
Press k eys
F3
,
F4
,
F5
,
F6
to shift position of cursor
b
(Fig. 112) on field.
2b
Once you reach the desired position, press
F2
.
3b Confirmation prompt is displayed: press
OK
.
Fig. 141
Skipper LT can store only one breaking point, so that
every time you set a flag, the previous one will be
deleted.
Fig. 112
WORK FUNCTIONS - PAGE 2