Arada MaxR-3210, User Manual

Page: 108 / 114

MaxR-3210 Wireless-N Access Point User Manual
Index-2
v1.1, Dec 2009
beacon generation, support for 1-4
beacon interval 4-5
bridge
network authentication 2-20
bridge mode wireless station
wireless point to point bridge 4-8
wireless point-to-multi-point bridge 4-8
BSSID 3-16
C
Category 5 Ethernet cable 1-5
change password 3-10
channel auto
testing connectivity 2-17
channel auto selection 2-17
channel interference 2-17
channel spacing 2-3
channel spacing, recommended 2-15
channel, auto
configuring channel/frequency 2-14
channel, default 2-14
CLI
command set 3-4
command line interface (CLI) 3-3
configuration file 3-6
backup or restore 3-7
conventions, typographical 1-i
coverage 2-2
coverage area 1-1 , 2-9
CSMA/CA 4-5
CSMA/CD (Carrier Sense Multiple Access with Collision
Detection)
4-5
CTS (Clear to Send) 4-5
D
data encryption settings
128 bits WEP 2-21
152 bits WEP 2-21
64 bits WEP 2-21
AES 2-21
none 2-21
TKIP 2-21
TKIP + AES 2-21
data rates 802.11bgn 2-15
default access point name 2-6
default channel 2-14 , 2-17
default gateway, configure 2-12
default IP address 2-4 , 2-12
default password 2-4
default reset button 3-9
default SSID 2-10
default user name 2-4
default wireless access point name 2-10
DHCP
point-to-multi-point bridging 4-14
DHCP client
default setting 2-10
DHCP client, configure 2-12
DHCP client/server
support 1-2
DHCP server
configure 4-1
on LAN 2-12
on LAN, assigns IP address 2-10
distributed coordinated function, support for 1-4
documentation 2-5
DTIM (Delivery Traffic Indication Message) interval 4-6
dynamic encryption key generation, support 1-2
dynamic IP address, configure 2-10
dynamic per frame rekeying 2-3
E
EDCA (Enhanced Distributed Channel Access) 4-7
Ethernet
RJ-45 port 1-6
ethernet cable, connect 2-10
F
factory default settings 3-6