MaxR-3210 Wireless-N Access Point User Manual
6
Arada Systems Confidential
v1.1, Dec 2009
The Web browser used to upload new firmware into the MaxR-3210 must support HTTP uploads,
such as Microsoft Internet Explorer 6.0 or above, or Firefox 1.5 or above.
To upgrade the MaxR-3210 firmware:
1.
Download the new software file from the Arada Systems’ support website, save it to your hard
disk.
2.
Under the
Maintenance
tab, select
Upgrade
from the main menu, and then select
Firmware
Upgrade. The Firmware Upgrade screen displays as shown in
3.
Click
Browse
and browse to the location of the upgrade file.
4.
Click
Apply
.
When the upload completes, your Access Point will automatically restart. The upgrade process
typically takes about 2 minutes.
Configuration File Management
The MaxR-3210 Wireless Access Point settings are stored in the Access Point in a configuration
file. This file can be saved (backed up) to a user’s computer, retrieved (restored) from the user’s
computer, or cleared to factory default settings.
Figure 3-4 Firmware upgrade screen
