MaxR-3210 Wireless-N Access Point User Manual
Arada Systems Confidential
3
v1.1, Dec 2009
I cannot connect to the MaxR-3210 to configure it.
Check these items:
•
The MaxR-3210 is properly installed, LAN connections are OK, and it is powered on. Check
that the LAN port LED is green to verify that the Ethernet connection is OK.
•
The default configuration of the MaxR-3210 is for a static IP address of 192.168.0.237 and a
Mask of 255.255.255.0 with DHCP disabled. Make sure your network configuration settings
are correct.
•
If you are using the NetBIOS name of the MaxR-3210 to connect, ensure that your computer
and the MaxR-3210 are on the same network segment or that there is a WINS server on your
network.
•
If your computer is set to “Obtain an IP Address automatically” (DHCP client), restart it.
•
If your computer uses a Fixed (Static) IP address, ensure that it is using an IP Address in the
range of the MaxR-3210. The MaxR-3210 default IP Address is 192.168.0.237 and the default
Subnet Mask is 255.255.255.0. If you are not sure about these settings, follow the instructions
for
“Installing the MaxR-3210 Wireless Access Point” on page 2-4
.
When I enter a URL or IP address I get a timeout error.
A number of things could be causing this. Try the following troubleshooting steps.
•
Check whether other PCs work. If they do, ensure that your PCs TCP/IP settings are correct. If
using a Fixed (Static) IP Address, check the Subnet Mask, Default Gateway, DNS, and IP
Addresses.
•
If the PCs are configured correctly, but still not working, ensure that the MaxR-3210 is
connected and turned on. Connect to it and check its settings. If you cannot connect to it, check
the LAN and power connections.
•
If the MaxR-3210 is configured correctly, check your Internet connection (DSL/Cable modem
etc.) to make sure that it is working correctly.
•
Try again.
