MaxR-3210 Wireless-N Access Point User Manual
14
Arada Systems Confidential
v1.1, Dec 2009
•
Only one access point is configured in Point-to-Multi-Point Bridge mode, and all the
others are in Point-to-Point Bridge mode.
•
All access points must be on the same LAN. That is, all the APs LAN IP address must be
in the same network.
•
If using DHCP, all MaxR-3210 Wireless Access Points should be set to “Obtain an IP
address automatically (DHCP Client)” in the IP Address Source portion of the Basic IP
Settings menu.
•
All MaxR-3210 Wireless Access Points use the same SSID, Channel, authentication
mode, if any, and encryption in use.
•
All Point-to-Point Access Points must have the AP2 MAC address in its Remote AP MAC
address field.
4.
Verify connectivity across the LANs.
•
A computer on any LAN segment should be able to connect to the Internet or share files
and printers with any other PCs or servers connected to any of the three LAN segments.
•
Wireless stations will be able to connect to the MaxR-3210 Wireless Access Points in the
illustration above. If you require wireless stations to access any LAN segment, you can
add additional MaxR-3210 Wireless Access Points configured in Wireless Access Point
mode to any LAN segment.
5.
Click
Apply
to save your settings.
Note:
You can extend this multi-point bridging by adding additional MaxR-3210s
configured in Point-to-Point mode for each additional LAN segment.
