MaxR-3210 Wireless-N Access Point User Manual
Arada Systems Confidential
11
v1.1, Dec 2009
3.
Then enter the new password twice—once in the
New Password
field and again in the
Repeat
New Password
field.
4.
Click
Apply
to save your change.
Enabling the SysLog Server
The SysLog screen allows you to enable the SysLog option if you have a SysLog server on your
LAN.
To enable a SysLog server:
1.
Under the
Configuration
tab on the main menu, select
System
, then select the
Advanced
option, and select
SysLog
to view the screen shown in
.
2. Enable SysLog –
Enable this option if you have a SysLog server on your LAN. If enabled,
you must enter the IP address of your SysLog server and the port number your SysLog server
is configured to use. The default is Disabled.
3. SysLog Server IP Address –
The access point will send all the SysLog to the specified IP
address if SysLog option is enabled.
4. Port Number –
The port number configured in the SysLog server on your LAN. Default is
514.
Figure 3-9 Enable Syslog server