Arada MaxR-3210, User Manual

Page: 77 / 114

Arada Systems Confidential 1
v1.1, Dec 2009
Chapter 4
Advanced Configuration
This chapter describes how to configure the advanced features of your MaxR-3210 Single Band
Wireless-N Access Point. The advanced configuration features are located under the
Advanced
sections of various sub-menus under Configuration and provide the following functions:
• IP Settings . Using the Access Point as a DHCP server for wireless clients ( “IP Settings for
Wireless Clients ).
• Hotspot settings. Enabling HTTP redirect ( “Hotspot Settings ).
• Wireless Settings : Configuring advanced wireless LAN parameters ( “Configuring Advanced
Wireless Settings ).
• Advanced QoS Settings : Configuring advanced QoS settings ( “Configuring Advanced QoS
Settings )
• Access Point Settings : Enabling wireless bridging modes ( “Enabling Wireless Bridging ).
IP Settings for Wireless Clients
You can turn the MaxR-3210 into a DHCP Server for wireless clients for both DHCP-enabled
wireless clients. The default advanced IP wireless settings usually work well. This feature is
intended for use by a systems administrator. By default, this feature is not enabled.
To use this Access Point as a DHCP server:
1. From the main menu under Configuration , select IP , and then select DHCP Server Settings .
The DHCP Server Settings screen displays (see Figure 4-1 ).
2. DHCP Server is disabled by default. Select the Enable radio button to enable this wireless
access point as a DHCP server.