MaxR-3210 Wireless-N Access Point User Manual
Arada Systems Confidential
9
v1.1, Dec 2009
2.
On the Restore Defaults screen, enable the
Restore to factory default settings
option by
selecting the
Yes
radio button.
3.
Click
Apply
to reset to the factory default settings.
After a restore, the Access Point password will be
password
, the default LAN IP address will be
192.168.0.237
, and the access point name will reset to the name printed on the label on the bottom
of the unit.
To restore the factory default configuration settings without knowing the login password or IP
address, you must use the Default Reset button on the rear panel of the Access Point. The reset
button has two functions:
•
Reboot.
When pressed and released, the Wireless Access Point will reboot (restart).
•
Reset to Factory Defaults.
This button can also be used to clear all data and restore all
settings to the factory default values.
To clear all data and restore the factory default values:
1.
Power off the MaxR-3210.
Figure 3-7 Restore to factory defaults
