Rise
™
Installation Guide 18
31
The Quartz
Smart Valve
™
is supplied factory set to either
‘NORMAL HP’ mode or ‘NORMAL
GRAVITY’ mode depending on which product has been ordered.
BALANCED HP SYSTEMS AND SEPARATELY PUMPED GRAVITY SYSTEMS:
The standard Quartz
Smart Valve
™
fits to balanced high pressure
systems or separately pumped gravity systems. It may be set to
‘NORMAL HP’, or for water economy, ‘ECO HP’ mode.
STANDARD COMBINATION BOILER SYSTEMS:
When installed on combi boiler systems, the standard Quartz
Smart
Valve
™
should be set to
‘COMBI’ mode for optimum performance.
GRAVITY PUMPED QUARTZ SMART VALVE
™
:
The gravity pumped Quartz Smart Valve
™
installed on gravity
systems ONLY may be set to
‘NORMAL GRAVITY’, or for water
economy,
‘
ECO GRAVITY’ mode.
The ‘ECO’ flow rate mode should NOT be selected for shower or bath systems fitted to
combination boilers.
•
!
When making any adjustment to the Quartz Smart Valve
™
settings the power MUST
be isolated.
•
!
32
Reinstate the electrical supply to the Quartz Smart Valve
™
. Press the ‘Start/Stop’
button on the controller to turn the shower on.
33
Run the shower at maximum temperature (factory pre set
to 45ºC). If required, maximum temperature adjustment can
be made with a flat bladed screwdriver using the ‘
MAX TEMP
ADJUSTMENT’ control as indicated. When the temperature has
been set to the desired position, carefully replace the Quartz
Smart Valve
™
lid and secure the fixing screw, hand tight only.
Site conditions can affect temperature settings, installer to adjust as required.
•
!
The Rise
™
product has a number of additional functions available. Please note these
features are disabled as a factory default. To activate and programme these features
please refer to the separate user guide for commissioning and user instructions on how to
operate the shower.
