36
Flow control - Divert valves
1. The lever in the 12 o’clock position indicates the valve is fully closed.
When the lever is in the 9 o’clock position, the adjustable head outlet is
fully open.
When the lever or cover cap is in the 3 o’clock position, the fixed head
is fully open.
2. Turn the flow control clockwise or anti-clockwise to turn the desired
shower outlet on. The further the control is turned, the more water
flow is delivered.
3. Turn the flow control to the closed position after use.
N.B. Both shower heads CANNOT be used simultaneously.
Temperature control – Single outlet and Divert valves
1. Rotate the temperature control to select a comfortable showering
temperature, using the temperature markings as a guide.
IMPORTANT:
The temperature stop button should be pressed to allow for
a warmer setting.
N.B. As with many of the Aqualisa shower valves fitted to combination
boiler systems, it may be necessary to adjust the flow control knob and
reduce the flow to achieve a comfortable showering temperature.
Shower head
To avoid water dripping from the shower head after use, we advise to tilt
the head back to allow residual water to drain out.
The above recommendation applies to both adjustable and fixed shower
heads.
1. To select the preferred height for the shower head, depress the
handset holder levers (round kit) or rotate the handle 1/4 of a turn
(square kit) to enable the slider to be moved up or down the rail.
