21
screw and refit the lever or cover cap. Turn the control knob to the
‘OFF’ position (12 o’clock).
To fit the bottom (bath fill) control knob, ensure the brass on/off
spindle is in the off position (turned fully clockwise). Unscrew and
remove the lever or cover cap from the control knob and loosen the
grub screw located in the control knob. Fit the control knob to the
on/off spindle with the grub screw and lever hole positioned to `OFF’
(6 o’clock). Tighten the grub screw and refit the lever or cover cap.
8
Reinstate water supplies and test.
I
NSTALLATION - WALL OUTLETS
Backnut washer
Backnut
Wall
Wall outlet
Cover plate
Female fitting
(not supplied)
Wall
Wall outlet
Cover plate
With rear access
Without rear access -
see page 22
Backnut washer
Backnut
Wall
Wall outlet
Cover plate
Female fitting
(not supplied)
Wall
Wall outlet
Cover plate
N.B. Round wall outlet shown for illustrative purposes.
With rear access:
1
Run pipework from the shower valve to the desired location for the
wall outlet ensuring it terminates in a suitable ½” female connector
(not supplied). All pipework and connectors must be secured using
suitable fixings.
