28
3
Ensure that the cover plates remain attached to the rail brackets, if
these have come off, slide them back into place.
4
Fit the handset holder to the rail.
N.B. To release or tighten rotate the
handle 1/4 of a turn.
The holder section can be to the left
or right side of the rail, ensure that the
chamfered side is facing up to allow the
hose and handset to dock correctly.
5
Slot the grey rail brackets into the rail and place the assembly on the
wall; lining up the fixing points, secure to the wall.
6
Slide the rail end covers onto the brackets until they click into place.
7
Ensuring the hose washer is in the correct position; attach the hose to
the wall outlet. Run the shower for a few seconds to clear any debris that
may be present (wall outlet installation instructions - page 21).
8
Ensuring the hose washer is in the correct position; attach the end of
the hose to the shower head, then place the hose in the handset holder.
