26
2
Fit the gel hanger to the rail followed
by the handset holder.
N.B. The handset holder side levers must
be depressed whilst fitting.
Ensure that the chamfered side is facing
up to allow the hose and handset to dock
correctly.
3
Secure the upper rail bracket into position
on the finished wall surface using the
short wall screw provided (if suitable).
4
Attach the lower rail bracket onto the
bottom of the rail.
5
Slide the rail assembly up through the upper rail bracket.
6
Align the fixing hole of the bottom
bracket with the corresponding holes on
the rail assembly, ensuring the smaller
sized hole on the rail is closest to the wall.
Secure the bottom rail bracket to the wall
using the long wall screw.
7
Place the rail end caps into the brackets and push firmly into position.
