Aquacal AutoPilot SP05, Installation Manual

Page: 3 / 89

Table of Contents
Contacting AquaCal AutoPilot, Inc. 1
Safety Instructions 1
1 - Installation 3
1.1 Positioning Equipment 4
1.2 Clearances 4
1.3 Dimensions 6
1.4 Plumbing 7
1.4.a Plumbing Requirements 7
1.4.b Plumbing Diagrams (Water Source) 8
1.4.c Plumbing Diagrams (SunPower) 11
1.4.d Water Connections to Heat Pump 12
1.4.e In-Line Chlorine Feeders 14
1.4.f Water Flow Rates 14
1.4.g Adjusting Water Flow Using ΔT (Delta-T) 15
1.4.h Geothermal Menus 17
1.4.i Maintaining Ability to Winterize 18
1.5 Electrical 19
1.5.a Electrical Requirements 19
1.5.b Incoming Power Access Holes 22
1.5.c Access Panels 23
1.5.d Verifying Transformer Setting 23
1.5.e Three-Phase Adjustment 25
1.5.f Schematic Location 25
1.6 External Equipment 26
1.6.a Connecting a Call Flex 26
1.6.b Connecting a Source Water Relay Switch 29
1.6.c Connecting External Controllers to Heat Pump 29
c.1 Connecting Smart Bus Controllers 30
c.2 Connecting Two-wire Controllers (with internal thermostat) 33
1.6.d Connecting Gas Backup Heater to Heat Pump 36
1.6.e Connecting Multiple Heat Pumps (Primary / Secondary) 41
1.6.f Connecting a Pool/Spa Switching Relay 47
1.7 Program Heat Pump for the Customer 50
1.7.a Setting Date and Time 50
1.7.b Setting Time and Date Format 51
1.7.c Selecting Celsius or Fahrenheit 55
1.7.d Setting Entry Code Option 56
1.7.e Using Entry Code to Access Heat Pump 58
1.7.f Resetting Factory Defaults 58
1.8 Cleaning Equipment After Installation 60
2 - Troubleshooting 62
2.1 Fault Codes 63
2.2 Issues and Resolutions 67
3 - Appendix 73
3.1 Factory Defaults 73
3.2 Identifying Model Specifications 74
i