Aquacal AutoPilot SP05, Installation Manual

Page: 66 / 89

Page - 62
2 - Troubleshooting
IN THIS SECTION:
Fault Codes
AIR TEMP SENSOR OPEN or AIR TEMP SENSOR SHORT 63
CLOCK LOW BATTERY 63
ERROR AT PRIMARY UNIT 63
HIGH PRESSURE FAULT 64
HIGH WATER TEMPERATURE 64
HP5 SYSTEM LOCKOUT 64
LOW PRESSURE FAULT 65
LP5 SYSTEM LOCKOUT 65
MULTI-UNIT COMM FAULT 65
NO LOCAL EXPANSION 65
OTA SYSTEM LOCKOUT 66
SMART COMM FAULT 66
SOURCE FLOW FAULT 66
SOURCE-IN SENSOR SHORT or SOURCE-IN SENSOR OPEN 66
SOURCE-OUT SENSOR SHORT or SOURCE-OUT SENSOR OPEN 66
SOURCE HIGH WATER TEMP 67
SOURCE LOW WATER TEMP 67
WATER TEMP SENSOR SHORT or WATER TEMP SENSOR OPEN 67
Issues and resolutions
A Front Panel Warning Indicator is Red (Select Units) 68
Blank Display 68
Can't set temperature above 96° F (35.6° C) 68
Display Panel Not Responding 68
Displays "NO SYSTEM FIRMWARE" 68
Displays "NO POOL/SPA WATER FLOW" 69
Displays "NO SOURCE WATER FLOW" 69
Displays "SET TO SWITCH REMOTELY" 69
Displays "SET UNIT MODEL NUMBER" 69
Heat Pump Not Running 70
Heat Pump's Tripping Breaker 70
Heat Pump Won’t Shut Off 70
Heat Pump Is Running, Not Heating 71
Heat Pump Is Running, Not Cooling 71
"Pool / Spa" Button Will Not Work 72
2
-
T
roubl
es
hoot
ing