11
Quality for Professionals
5.7 Electrical connections
You can connect the standard cable
included in the scope of delivery directly
to the 3-pin standard socket in the tractor
cab. Connect the other end with the
control module.
The fuse (30A) is on the right side of the
control module.
TIP: If the tractor does not have a standard socket, it can be be retrofitted with the
Complete Cable Kit for Power Sockets (art. no. 201921)(accessories).
ATTENTION: The 12 Volt power supply may NOT be connected to the cigarette
lighter! After using the device, the controller should be disconnected (for various
safety reasons).
Failure to observe these instructions can result in damage to the control module!
If the battery is charged by a charger which is in the operating mode "Start", this may
result in voltage peaks! These can damage the control module's electric system if the
control module is also connected when charging the battery!
Pic.: 12
