39
Quality for Professionals
12.4 Maintenance
•
Repairs, maintenance and cleaning work, as well as remedying of malfunctions
must always be carried out after the drive has been switched off and the engine
has reached a standstill! – remove the ignition key! – switch off the device!
•
Regularly check nuts and bolts for tight seating and retighten if necessary!
•
During maintenance work when a device is lifted, always secure using suitable
supporting elements!
•
When replacing blades in working tools, use suitable tools and gloves!
•
Dispose of oils, greases and filters correctly!
•
Always disconnect the power before working on electrical systems!
•
When carrying out electrical welding on the tractor and its attached devices,
disconnect the cable on the generator and the battery!
•
Spare parts must comply at the very least to the technical requirements stipulated
by the device manufacturer! This is guaranteed by using original spare parts!
•
Do not clean the implement with water. We recommend cleaning the implement
with compressed air.
Attention: Printing errors reserved, all information is subject to change.
