6
Quality for Professionals
5 Assembling the PS
5.1 Design and mode of operation
The pneumatic seed drill is a spreading and seeding device with 120/200/300/500
litres capacity.
The sowing shaft is driven by a 12 V electrical drive motor regulated by the controller.
The sowing shaft speed can easily be regulated by the controller from the driver's
seat.
As an option, the sowing shaft's speed can be synchronised with the speed of the
tractor by using various speed sensors (available as an accessory) in combination
with tractor linkage sensors (optional).
The control module's power supply can be established either via the 3-pin standard
socket or directly via the battery.
5.2 Assembly on an attachment
To assemble the seed drill on a tiller use the standard counter plate included in the
scope of delivery, which can be bolted to the various devices.
Stainless steel bolts with a diameter of 10 mm and the appropriate length should be
used to assure that the machine part is properly and securely fastened.
Example:
Counter plate for assembly
ATTENTION: APV assumes no liability for incorrect assembly or improper use of the
device.
Pic.: 1
Pic.: 2
