34
Quality for Professionals
10.4 Cable extension 5m (6-pin)
This is a cable extension (5m) for the device cable
(6-pin connector).
This extension cable is necessary if the tiller is longer
than the factory fitted 6m cable or to make it possible
to route the cable in a more practical way.
Scope of delivery: 1 extension cable
Order number:
Art. no.: 00410-2-015
10.5 Complete cable set for power socket
to retrofit the tractor
There is a retrofit-kit as an accessory for the control
module power supply equipped without the standard
3-pin socket on the tractor. This consists of an 8m
long cable.
At the battery, this is screwed right to the battery
terminals, and at the other end is a standard three-
pin socket.
Scope of delivery: 1 cable set
Order number:
Art. no.: 00410-2-023
Three-point bracket for the front assembly
You can connect the PS 120/200/300/500 M1, PS 500 M2 to a CAT 1 – CAT 3 tripod
with the three-point bracket . Four support legs are optionally available for this three-
point bracket to make it easier to park the device.
Scope of delivery: 1 three-point bracket
Order number:
Art. no.: 04000-1-003
Pic.: 40
Pic.: 40
Pic.: 40
Pic.: 40
Pic.: 41
Pic.: 41
Pic.: 41
Pic.: 41
Pic.: 42
Pic.: 42
Pic.: 42
Pic.: 42
