29
Quality for Professionals
7.9 Use on a field
When you start to sow, proceed as follows:
o
Start your tractor.
o
Switch on the control module with the "On/Off" button.
o
Switch on the fan with the "Fan" button.
o
To begin seeding, press the “Sowing wheel“ button to start the drive motor.
Note:
The next two items can be disregarded if you are working with a hoist sensor (7 pin plug, hoist
sensor). In this case however, a 5.2 control module must be installed.
o
When turning at the end of each row, just press the “Sowing wheel“ button
until the green LED goes off.
o
On completion of work, first switch off the sowing wheel, then the fan and
finally the entire control module using the "On/Off" button.
The following points should be observed when working in the field:
o
The fans should always be switched on when working in the field.
o
Check the required sowing volume.
o
Check for identical width distribution (spacing) of the baffle plates.
o
Check the height of the baffle plates: Distance from ground approx. 20 - 40
cm.
o
Angle of baffle plates: Fixing plate for baffle plates mounted approx. 90° (at
right angles) to the ground.
o
Sowing hoses should be tilted slightly downwards or routed horizontally on the
working tool.
o
The container lid must be closed tightly.
