20
Quality for Professionals
7.4 Mixer
The mixer is only necessary for seed types which tend to form
bridges or for very light seed (i.e.: for grasses).
If the mixer is not required, you only need to remove the O-ring
tensioned between the mixer and the sowing wheel.
7.5 Wheel air sheet
NOTE: With larger seeds such as sweet
peas, peas, horse beans or similarly large
seeds, it is necessary to remove the wheel
air sheet (also with a hydraulic or universal
joint fan) in order to prevent damage to the
sowing wheels.
TIP: We also recommend Flex sowing wheels, as they can be bent and cannot
break. (see below, Point 7.1)
7.6 Sensor
Fill level sensor (standard with the PS 500 M1 / M2, special attachment with the
PS 120/200/300 M1)
The level sensor reacts when it is no longer covered by seed!
Its height can be adjusted depending on how much seed you
want left in the container after the sensor triggers.
The intensity of the sensor can also be adjusted to the
respective seed. This is set using the small slotted screw at
the rear of the sensor!
The sensor lights up when connected through and the
container is full!
You can test this by covering the front of the sensor with your hand; it must now start
to light up.
In this way, you can easily check whether the sensor is functioning and the intensity
is correct!
Pic.: 26
Pic.: 26
Pic.: 26
Pic.: 26
Pic.: 28
Pic.: 28
Pic.: 28
Pic.: 28
(
screwed with 4 Torx screws (TX30) M6 x 12 mm)
Pic.:
Pic.:
Pic.:
Pic.: 27
27
27
27
