Page 20
Translation of the original operating manual
11.3 Changing the tines
To replace broken or worn tines, all you have to do is loosen the nut and take out the tine (10 or
12 mm tines).
As shown in Fig. 20, you must hook on the new 10 or 12 mm tines and re-tighten the nuts.
Pay attention to the proper line distance!!!
The tines in the rear row cut the distance of the front tines in half.
Fig. 20
1:
Unscrew the nut
2:
Hook for fixing
11.4 Tine safety
As a standard, the GK series is equipped with a
tine safety by means of a rope. It protects the
tines so that they do not get lost on the pasture
or on the field. This also prevents damage to
other implements, e.g. the mower or the baler.
Fig. 21
11.5 Repairs and service
In case of failure or damage to the Grassland Combi, please contact the manufacturer. The contact
data can be found in chapter 3.
12 Information on nature conservation and environmental
protection
Reduction of noise pollution during use
Any loose parts (e.g. chains) should be attached to prevent unnecessary noise.
