Translation of the original operating manual
Page 11
6.2 Hazard labels
Be careful with
escaping high-
pressure liquids!
Observe the
instructions in the
operating manual!
Do not stand between
the machines when
connecting the
implements and
actuating the
hydraulic system!
Do not climb onto
rotating parts, use the
intended access
ladders!
Caution, crushing
area!
Never reach into the
crushing danger zone
as long as the parts
could still move!
Danger due to parts
being flung out;
observe the safety distance!
7
Operating manual for GK 250/300 M1
7.1 Mounting on the tractor
The air pressure in the rear tractor tyres should be of
0.8 bar
during operation. If the tyres have a
lower load capacity, increase the pressure.
Under difficult operating conditions, additional wheel weights can be useful. Please also refer to
the operating manual from the tractor manufacturer.
The tractor should be equipped with sufficient ballast weight at the front to ensure the steering
and braking capacity. At least 20 % of the empty vehicle weight is required on the front axle.
The lifting links must be adjusted to the same height on the left and on the right.
Mount the implement on the 3-point linkage of the tractor.
Mount the top link so that it slants down towards the tractor during operation. Observe also the
sticker on the implement. (Observe the specifications from the tractor manufacturer)
