Page 14
Translation of the original operating manual
Fig. 10
1:
16 mm pin
2:
Pin lock
3:
Continuous 28 mm connecting pin
Carefully lower the implement until the roller is stable, then relieve the roller cylinder so that the
pin can be pulled out.
TIP!
To prevent paint damage, remove the roller cylinder.
Disconnect the plug connection for the wiring harness on the tractor side and open the
releasable cable ties on the harrow frame. The wiring harness is then only still fastened to the
roller. Install the top link sensor from the harrow onto the roller.
Now carefully lower the harrow until the connecting pins for the
roller are completely released from the roller frame. Now you can
slowly drive forward and uncouple the harrow.
Insert the connecting pins from the harrow in the roller frame. If
you want to couple the roller, you still have to use the fitting balls
with the supplied spacer bushings (Fig. 11).
Fig. 11
Fig. 12
1:
Top link sensor
2:
Roller cylinder
3:
Wiring harness
4:
Connecting pin
