Page 12
Translation of the original operating manual
After coupling the lower link, turn around the parking support by pulling out the pin, reposition it
and then secure. (Fig. 2; Fig. 3)
Fig. 2
Fig. 3
Connect the hydraulic hoses to a double-acting control unit. During connection, make sure that
the hoses are unpressurised both on the tractor and implement sides.
PLEASE NOTE!
To ensure correct connection, the hydraulic hoses are
labelled as follows:
1 red cable tie: cylinder extends (A in Fig. 4),
2 red cable ties: cylinder retracts (B in Fig. 4).
Fig. 4
8
Separate operation
On steep terrain or with a tractor with
low lifting capacity, it is recommended
to separate the operation of the
implement. To do so, the harrow and
the roller must be separated.
Fig. 5
Proceed as follows:
Lift the implement until the roller no longer has contact with the ground.
Move the support for the roller to an optimal position to park the roller safely.
