28
www.Aprimatic.it
9. START
‐
UP PROCEDURE OF THE AUTOMATIC SWING DOOR
9.1 Preliminary checks.
At the end of the installation, move the doors manually and make sure that operation is smooth and without friction. Check
the solidity of the structure and the proper attachment of all the screws. Check the correctness of all electrical connections.
Make sure you have installed the mechanical stop of the open door.
9.2 Before connecting any security devices, leave the jumper on terminals safety (41
‐
6A, 41
‐
8A).
9.3 Giving power supply and connect the battery, if present.
Note: every time you switch on the automation performs a self
‐
test (from 3 to 30 seconds). The first opening and closing
cycle is at low speed to allow the automatic learning.
9.4 To ensure that the electronic control has the factory settings, restore via the menu:
MEM> FSET> YES (confirm by pressing ENTER for 1 second).
Note: if the door is hinged on right, set as follow: MENU > OPEN >
→
(confirm by pressing ENTER for 1 second).
Note: if the door is with articulated arm, set as follow: MENU > ARM > PUSH (confirm by pressing ENTER for 1 second).
Note: if the door is OVER EVO (SPRING model), set as follow: MENU > DOOR > OVER EVO (confirm by pressing ENTER for 1
second).
Note: if the door is OVER HEAVY (HEAVY model), set as follow: MENU > DOOR > OVER HEAVY (confirm by pressing ENTER for
1 second).
9.5 Perform the menu settings as described in Chapter 8. Use OPEN button to perform the opening door, and verify the
correct operation of the door.
Note: the automation automatically detects any obstacles during the closing movement (reversal movement) and opening
(stopping movement).
9.6 If present, connect the electric lock of the door to the terminals (
‐
LK \ +LK) of electronic control, and make the settings
available in the ADV menu.
9.7 Connect one at a time, control and
safety devices to protect the opening and
closing cycle of the door, as described in
Chapter 7.6, and verify proper operations.
Note: verify that the opening access is
properly protected by safety sensors, in
accordance with the requirements of the
European standard EN16005 (annex C).
9.8 At the end of the automation starting, deliver to the owner the user instructions,
including all warnings and information necessary to maintain the security and
functionality of the automatic door.
9.9 APRIMATIC automations are feature of label containing the required information
by European standards EN16005 and EN60335
‐
2
‐
103.
Note: the manufacturer of automatic swing door can add or change the label
APRIMATIC with their product label.
APRIMATIC srl
Viale delle Industrie, 74
‐
31030
E
‐
mail: [email protected] \
www.Aprimaticspa.it
