21
www.Aprimatic.it
8. ELECTRONIC CONTROL ADJUSTEMENT
The electronic control has 4 buttons and 4 alphanumeric displays to set all the necessary adjustments.
After turning on the electronic control, the display shows the word "MENU". The operation of the four keys are indicated in
the table.
Keys
Description
ENTER
Select button, each time you press the button you enter on the selected
parameter.
Save button, pressing for 1 seconds you "SAVE" the selected value.
MENU = Main parameters menu
MEM = Memory management menu
ADV = Advanced parameters menu
SEL = Function selector menu
INFO = Information and diagnostics menu
ESC
Exit button, exit from all the parameter or exit from the menu.
↑
Scroll button, each press selects a menu item or increases the value of
the selected item.
↓
Scroll button, each press selects a menu item or reduces the value of
the selected item.
8.1 BASIC SETTINGS MENU
Using the buttons
↑
and
↓
choose MENU, press ENTER to select and adjust the following main parameters:
Display Description
Factory settings
OPEN
Setting the opening direction. Choose between the following values:
←
= door hinged on left
→
= door hinged on right
←
VOP
Opening speed setting. Choose between the minimum and maximum:
minimum value = 15 deg/s
maximum value = 70 deg/s
50
VCL
Closing speed setting. Choose between the minimum and maximum:
minimum value = 100 mm/s
maximum value = 700 mm/s
50
TAC
Open door time setting. Choose between the minimum and maximum:
NO = the door is always open
minimum value = 1 s
maximum value = 30 s
1
PUSH
Force setting. Choose between the minimum and maximum:
minimum value = 1
maximum value = 10
10
BTMD
Setting operation of battery power device, in absence of electricity. Choose between the following
values:
NO = battery not connected
EMER = emergency open
CONT = continuation of normal operation of the door, with last cycle of opening
Note: the number of operations with battery, depends on the efficiency of the battery, the weight of
the doors and the present friction.
NO
ARM
Setting the type of arm. Choose between the following values:
PULL = sliding arm
PUSH = articulated arm
PULL
DOOR
Setting the automation type. Choose between the following values:
OVER = OVER automation (LIGHT)
OVER EVO = OVER EVO automation (SPRING)
OVER HEAVY = OVER HEAVY automation (HEAVY)
OVER
LEAF
Setting the weight of the door. Choose between the following values:
MIN = light door
MED = medium door
MAX = heavy door
MED
RAMP
Set the acceleration time. Choose between the minimum and maximum values:
minimum value = 100 ms (maximum acceleration)
maximum value = 2000 ms (minimum acceleration)
400
